Page 0002

05-17-352_0038_03_GB ©2017 Combisafe International Ltd.

Just one COMBISAFE Loading System MKII is required for a 8m

length flatbed trailer but two will be necessary if the vehicle

exceeds 8m and the user must be connected to both Fall Arrest

Blocks simultaneously. The anchor position is 5.9m from the

ground when used with the SkyReach Loading System Adaptor.

SETTING UP THE COMBISAFE

LOADING SYSTEM MKII

COMBISAFE Loading System MKII

Single Base Assembly

Art No: 8806

Weight 304kg

Height 5.9m*

COMBISAFE Loading System MKII

Double Base Assembly

Art No: 8810

Weight 610kg

Height 5.9m*

COMBISAFE Precast Kentledge

Art No: 11665

Weight: 800kg x 2

Standard Assemblies

For full information of other available assemblies and

additional components please refer to the relevant user

instruction

STEP 2

Place the corner posts into

the bottom frame.

STEP 5

Use a crane to lift the

assembled SkyReach

Anchor and lower it into

the Top Column 4.7 or

SkyReach Adaptor 5.9

until fully engaged.

STEP 3

If using COMBISAFE supplied

Precast Concrete Blocks, employ

a forklift to place the two blocks

into the base unit. Fit formwork

supports and timber shuttering

if using aggregate or site-cast

concrete as ballast.

STEP 1

Ensure the base is level

by adjusting the feet

(max ground slope 5°).

STEP 4

Place the Top Column 4.7

or SkyReach Adaptor 5.9

into the Top Frame while

standing on the ground.

Using a forklift, lift the

assembly into the legs

of bottom frame until fully

engaged.

* When using the Top Column, total height is 4.7m

Combisafe International Ltd

Safety Centre, Cheaney Drive, Grange Park,

Northampton, NN4 5FBUnited Kingdom

Tel +44 (0)1604 660 600 | Fax: +44 (0)1604 662 960

order@combisafe.com | Web: www.combisafe.com

Index

  1. Page 0001
  2. Page 0002

Related Issues

powered by PageTiger