Page 0038

GTMA SUPPLIERS AT MACH

Delcam will demonstrate the company's

unique Vortex strategy for high-efficiency

area-clearance at MACH.

Following the introduction of Vortex strategy

in PowerMILL 2014 last September,

Delcam's new roughing strategy has now

been added to the FeatureCAM, PartMaker

and Delcam for SolidWorks CAM systems.

A video showing the benefits of using

Vortex in FeatureCAM to program a HAAS

machine can be seen at

www.delcam.tv/vortexhaas

Vortex gives the fastest safe metal removal

from solid carbide tooling, in particular

designs that give deeper cuts by using the

full flute length as the cutting surface. It

can be used for two- and three-axis roughing, three-plus-two-axis

area clearance and

for rest machining. It gives benefits when

machining all types of materials, including

titanium, tool steel and alloys such as

Inconel.

Vortex produces toolpaths with a controlled

engagement angle and so maintains the

optimum cutting conditions for the toolpath

that would normally be possible only for the

straight-line moves.

As a result, higher feed rates are possible

so the cutting time will be shorter, while cutting will be undertaken at a more

consistent

volume-removal rate and at a constant

feed rate, so protecting the machine and

increasing the life of the cutting tools.

For more information on Delcam's range of

marketing@delcam.come contact Peter Dickin,

Marketing Manager, on 0121 683 1081 or

email marketing@delcam.com

• At last year's Advanced Engineering Show

at the NEC Delcam demonstrated machining

with robots using the PowerMILL Robot

Interface. The interface can be used for the

programming of robots for a variety of multiaxis machining operations, including patternmaking,

modelmaking, trimming and drilling

of composite components, and deburring

and polishing of metal parts.

www.delcam.com Stand 4011

DELCAM PLC

Hardcoating Technologies Limited (HTL) will demonstrate its full range of advanced coatings for engineering

businesses when it makes its debut at MACH.

The company was recently established in the UK with the

goal of providing an enhanced coating service focused on

quality and efficient service and is one of the company's

within the GTMA Pavilion.

Visitors will be able to find out about HTL's PVD (physical

vapour deposition) coatings. These include Super Nitride

coating for drills and milling tools such as Aluminium Titanium

Nitride AlTiN SuperAlt (also known as Hyperlox) and Titanium

Diboride TiB2 SuperTib (also known as AluSpeed).

For indexable inserts Allox SN2 - TiAlN Plus - double thickness coating, and Hyperlox can also be applied. Power

Nitride coatings using the HiPIMS state-of-the-art process

include HiPulse Power for superior tool life and performance

on stainless, titanium and high temperature alloys; and

HiPulse Hard.

This is the very latest coating technology offered by the

company. A second generation Nano-structured coating, it

offers significant performance benefits.

www.hardcoatingtech.com Stand 4459d

HARDCOATING TECHNOLOGIES

38

GTMA

UNIQUE VORTEX STRATEGY FOR CAM

Vortex in FeatureCAM gives a deeper cut on this

HAAS machine so reducing cycle times significantly.

ADVANCED COATINGS

TECHNOLOGY ON SHOW

Eley Metrology, which was founded in

1976 by the current Chairman Jeff Eley,

who also later acquired Crown Windley,

will be promoting its full range of solutions at MACH. The combined strengths

of the two include:

• The ground breaking LBM (Long Bore Measurement) machine.

Specifically designed for internal inspection of deep-bored components including aero-engine

shafts, undercarriage assemblies

along with oil and nuclear industry components.

• Truth and Millennium range of CNC Co-ordinate Measuring

Machines.

• The UK distributor for the DeMeet range of Optical non-contact

video measurement

• VMS (Vertical Measuring System) offering a range of sizes.

• CMM Retrofits, Software updates, Maintenance and Calibration

Services.

• Metrology Standards.

• Sub-contract Inspection services.

• UKAS and ISO10360 Accredited.

In addition it provides software to the metrology industry and has

recently released its latest True Measure CMM scanning package.

www.eleymet.com Stand 5754

ELEY METROLOGY

INSPECTION MACHINE

IS GROUND BREAKING

Index

  1. Page 0001
  2. Page 0002
  3. Page 0003
  4. Page 0004
  5. Page 0005
  6. Page 0006
  7. Page 0007
  8. Page 0008
  9. Page 0009
  10. Page 0010
  11. Page 0011
  12. Page 0012
  13. Page 0013
  14. Page 0014
  15. Page 0015
  16. Page 0016
  17. Page 0017
  18. Page 0018
  19. Page 0019
  20. Page 0020
  21. Page 0021
  22. Page 0022
  23. Page 0023
  24. Page 0024
  25. Page 0025
  26. Page 0026
  27. Page 0027
  28. Page 0028
  29. Page 0029
  30. Page 0030
  31. Page 0031
  32. Page 0032
  33. Page 0033
  34. Page 0034
  35. Page 0035
  36. Page 0036
  37. Page 0037
  38. Page 0038
  39. Page 0039
  40. Page 0040
  41. Page 0041
  42. Page 0042
  43. Page 0043
  44. Page 0044
  45. Page 0045
  46. Page 0046
  47. Page 0047
  48. Page 0048
  49. Page 0049
  50. Page 0050
  51. Page 0051
  52. Page 0052
  53. Page 0053
  54. Page 0054
  55. Page 0055
  56. Page 0056
  57. Page 0057
  58. Page 0058
  59. Page 0059
  60. Page 0060
  61. Page 0061
  62. Page 0062
  63. Page 0063
  64. Page 0064
  65. Page 0065
  66. Page 0066
  67. Page 0067
  68. Page 0068