Art no. 1270 Bridge Edge Attachment
A compact and rapidly deployed attachment, designed primarily for construction
joints on bridgeworks, and other starter bar applications. The attachment clamps
onto the reinforcement where it protrudes from the concrete, and can also be used on
timber beams. It can be reversed to change the offset from the slab edge to the post.
The clamping width is 10-100mm and the maximum height that can be clamped is
200mm. Once dismantled, this attachment can also be fixed directly to a vertical face.
• Weight: 4.7kg
• Hot-dip galvanised finish
• Complies with EN 13374 Class A
Art no. 1280 Bridge Attachment
Primarily used as an edge protection attachment for bridges utilising the bolts
for the permanent bridge barrier, but also works in many other applications.
Can also be installed using suitable drilled or cast-in anchors.
• Weight 1.2kg
• Hot-dip galvanised finish
• Complies with EN 13374 Class A
Art no. 10069 Anchor Socket
Weld directly to steel beams and structures to support edge protection posts
and barriers.
• Weight: 0.3kg
• Complies with EN 13374 Class A
36 POSTS & ATTACHMENTS - S-SYSTEM
Art no. 1239 Precast Edge Attachment MkII
This attachment is positioned and cast into the pre-cast unit at the factory.
A Flexi Attachment (Art no. 1221) or Façade Bracket (Art no. 1223/1224 for
Framed Barriers) is then fitted to the Precast Edge Attachment on site, to
support the edge protection beyond the edge of the slab. This permits clear
access for levelling off or completing other surface works whilst protected. The
assembly will support the edge protection before the topping has been poured.
• Weight 0.7kg
• Complies with EN 13374 Class A
• Hot-dip galvanised finish