37
Posts and Attachments - S-System
POSTS & ATTACHMENTS - S-SYSTEM
Art no. 1290 Multifoot
Used for horizontal surface applications, most commonly at the slab edge.
The three points of support allow accurate installation on an uneven surface and
ensure that the anchor load is correctly controlled. The Multifoot can be secured
using a variety of anchors appropriate to the base material.
• Weight 1.3kg
• Hot-dip galvanised finish
• Complies with EN 13374 Class A
Art no. 1455 Front Attachment
Mounted vertically and used both as an edge protection support and as a
shuttering support. Using a single fixing point a wide range of applications can
be covered. Fixing methods include using form ties, threaded bar, drilled fixings,
and cast in sockets.
• Weight 1.7kg
• Hot-dip galvanised finish
• Complies with EN 13374 Class A
Art no. 1401/1411 Timber Beam Attachment 40mm/60mm
Used to attach to timber soffit formwork beams and proprietary forming systems.
The attachment is quickly and easily secured to the form beam, by hammering
the wedge home. There are two models available depending on the size of the
form beam: Art no. 1401 for form beams with a top flange thickness of 60mm
and Art. No. 1411 for those with a 40mm top flange thickness.
• Art no. 1401/Flange thickness 60mm/Weight 3.7kg
• Art no. 1411/Flange thickness 40mm/Weight 3.5kg
• Hot-dip galvanised finish
• Complies with EN 13374 Class A
Art no. 1291 Cast-in-tray
The Multifoot (Art no. 1290) can be fitted to the structural slab before the
finishing screed is laid, and it is then protected from the poured concrete by
the Cast-In Tray. This Cast-In Tray permits a screed of up to 50mm to be poured
around the Multifoot, leaving access for easy removal and even re-use of the
Cast-In Tray. Once the Multifoot has been removed, and the Cast-In Tray pulled
out of the screed, the small void can be grouted up. The Multifoot performance is
not affected by use of the Cast-In Tray.
• Weight 0.12kg
• Polyethylene plastic