Art no. 1705 Eaves Attachment - Adjustable Extended
An adjustable Eaves Attachment for roof edge protection. The bolt
accommodates large variations in the width of the support, and the adjustable
post holder allows flexibility in positioning. The Telescope Arm (Art no. 1750/
1751/1752) or Rear Support Adjustable (Art no. 1741) is used with this
attachment. This extended version is mainly designed for hipped roofs where it is
used in the corners. In this case the Corner Telescope Arm (Art no. 2120) is used.
• Weight 7.4kg
• Registered Design
• Hot-dip galvanised finish
• Complies with EN 13374 Class A, B, C
Art no. 1704 Eaves Attachment - Adjustable
An adjustable Eaves Attachment for roof edge protection. The bolt
accommodates large variations in the width of the support and the adjustable
post holder allows flexibility in positioning. The Telescope Arm (Art no. 1750/
1751/1752) or Rear Support Adjustable (Art no. 1741) are used with this
attachment.
• Registered Design
• Weight 6.5kg
• Hot-dip galvanised finish
• Complies with EN 13374 Class A, B, C
Art no. 1726 Variable Angle Attachment
An attachment for pitched or flat roofs, slabs, slab edges, walls etc. The post
socket can be set at 5 different angles between 0º to 90º to the base plate, and
by moving the bolt, also at 180°.
• Weight 3.6kg
• Hot-dip galvanised finish
• Complies with EN 13374 Class A, B, C
Art no. 1601 Balcony Attachment
Designed to use cast-in channels or the fixings for the permanent handrails.
The fixing slots in this attachment can accommodate large variations in
diameter and spacing.
• Weight 1.2kg
• Hot-dip galvanised finish
• 270 x 184mm
• Complies with EN 13374 Class A
40 POSTS & ATTACHMENTS - S-SYSTEM