Art no. 4110 Toeboard Holder
Fitted to the edge protection Safety Post to hold wooden toeboards in position.
The design allows it to be fitted or dismantled with the guardrail in place.
• Weight 0.4kg
• Zinc-plated
• Complies with EN 13374 Class A
Art no. 4202 Stair Attachment
Used to support systems on stairs, permitting access to both the top surface
and the soffit. Two spurs/studs are pushed into the concrete during installation
stabilising the single point fixing. The Safety Post is positioned 90mm off the
edge of the stairs, creating space for finishes and nosings. Also ideal for use on
the edge of concrete floor slabs.
• Weight 2.7kg
• Hot-dip galvanised finish
• Complies with EN 13374 Class A
Art no. 4222 Flexi Attachment MkII
Used to provide a post attachment at an adjustable offset, up to max. 350mm
from a vertical surface. Used in beam webs, on walls, façades, shaft sides, or slab
edges etc. The bolt is pre-fitted to the base material and the keyhole used to
initially secure the attachment until the fastener is tightened. This safe method
reduces the risk of dropping the attachment during installation and permits
removal from the slab above, without the need for high level access below.
• Weight 4.8kg • Hot-dip galvanised finish
• 380 x 494mm • Complies with EN 13374 Class A
44 POSTS & ATTACHMENTS - C-SYSTEM