45

Posts and Attachments - C-System

POSTS & ATTACHMENTS - C-SYSTEM

Art no. 10957/10731/1265 Plastic Sleeve 2.3m/260mm/Plug

The simplest pre-planned attachment. The Plastic Sleeve is cut to the required

length and is fitted with the Plastic Plug. This is then cast-in to the slab in the

required position.

• Art no. 10957/Length 2300mm for cutting to length on site

• Art no. 10731/Length 220mm

• Art no. 1265 Plug

• Diameter (outer) Ø52.5mm, (inner) 49.5mm

• Weight 0.33kg/m

• Complies with EN 13374 Class A

Art no. 4238 Precast Attachment MkII

For use with filigree floor slabs. Easily placed into position on its four feet, this

innovative attachment is then secured to the rebar to prevent movement during

the pour. It can then support the edge protection before the topping has been

poured. It accepts loading in any direction and therefore does not require careful

orientation. Pre-cut plastic sleeves are then inserted once on-site.

• Weight 0.7kg

• Complies with EN13374 Class A

Art no. 4233 Precast Attachment

For use with filigree floor slabs, this innovative attachment is easily placed,

rotated into position on its three feet, and secured to the rebar to prevent

movement during the pour. It will accept loading in any direction and does,

therefore, not require careful orientation. The pre-cut plastic sleeves are inserted

once on-site. This attachment will support the edge protection before the

topping has been poured.

• Weight 0.6kg

• Complies with EN13374 Class A

Art no. 1239 Precast Edge Attachment MkII

This attachment is positioned and cast into the pre-cast unit at the factory.

A Flexi Attachment (Art no. 1221) or Facade Bracket (Art no. 1223/1224

for Framed Barriers) is then fitted to the Precast Edge Attachment on site, to

support the edge protection beyond the edge of the slab. This permits clear

access for levelling off or completing other surface works whilst protected. The

assembly will support the edge protection before the topping has been poured.

• Weight 0.7kg

• Complies with EN 13374 Class A

• Hot-dip galvanised finish