32 SCHWEGLER
BIRD CONSERVATION ON BUILDINGS
Kestrel Nest Box 2TF
Jackdaw Nest Box 2CM
» KESTREL NEST BOX 2TF Registered design
The Kestrel is a very adaptable species. As a synanthropic bird, i.e. living in a habitat made or altered by
humans, it has settled successfully in the human environment. Based on our Kestrel Nest Box No. 28, which
has been used very successfully for more than 25 years, a modern version has been developed especially
for use on buildings. Apart from the ornithological needs of the animals, attention was paid to proper,
technically perfect attachment to the building. Thanks to the curved shape and light-grey colour, the
nesting aid does not constitute a visual foreign body on the building but instead integrates harmoniously
on the structure. Thank to the large entrance, the Kestrel Box 2TF can be cleaned and inspected
conveniently from time to time or if necessary.
To accelerate settlement by Kestrels, we recommend placing a mixture of moist, coarse sawdust,
wood shavings and washed sand in the Nest Box.
Includes: Nest Box, perch, X-bracket, screws, universal wall plugs (check on site whether the supplied screws
are suitable for the substrate), locking screw, installation instructions.
Material: Weather-resistant SCHWEGLER wood-concrete, stainless steel X-bracket.
Installation: at least 6 - 8m installation height, on the external walls of buildings, walls, chimneys, industrial
plants. A mounting surface at least 30 cm wide is required. Distance between the nest boxes at least 400 m
(depending on the feed available).
External dimensions: B 47 x H 37 x D 46 cm (including perch).
Internal dimensions: B 30 x H 35 x D 31 cm (less taper).
Colour: light grey.
Weight: approx. 17 kg.
Order No. 00 255/6
» JACKDAW NEST BOX 2CM Registered design
Suitable Jackdaw roosts should be offered, especially where old buildings are renovated and structural changes
are made. The Jackdaw, as a medium-sized Corvid, is very social and forms breeding colonies if the conditions are
suitable. Based on the Jackdaw Nest Box No. 29, which has been used very successfully for more than 25 years,
a more modern version has been developed especially for use on buildings.
Nest Boxes 2TF and 2CM are fi xed onto the building wall with an X-bracket made of stainless steel. To this
end, the X-bracket is screwed onto the wall with 4 screws (and wall plugs if necessary) and the Next Box is
hung on the retaining hooks and secured with an additional locking screw. Alternatively, both the 2TF and the
2CM can also be installed in niches, on projections or on fl at roofs without the X-bracket. The front panel of
Jackdaw Box 2CM can be removed completely by undoing the side wing screws. Because the screws are
positioned to the side, away from the entrance, it is not possible for the Jackdaws to open the box.
Includes: Nest Box, perch, X-bracket, screws, universal wall plugs (check on site whether the supplied screws are
suitable for the substrate), locking screw, installation instructions.
Material: Weather-resistant SCHWEGLER wood-concrete, stainless steel X-bracket.
Installation: at least 6 - 8 m installation height, on the external walls of buildings, walls, chimneys, industrial
plants. A mounting surface at least 30 cm wide is required.
Distance between the nesting boxes: 1 - 2 m.
External dimensions: B 50 x H 37 x D 42 cm.
Internal dimensions: B 30 x H 35 x D 31 cm (less taper).
Colour: light grey.
Weight: approx. 21 kg.
Order No 00 256/3
NEW NEW
NEW NEW