» SINGLE NEST FOR HOUSE MARTINS No. 13
» HOUSE MARTIN NEST No. 9B Patent pending Material: SCHWEGLER wood-concrete
» HOUSE MARTIN SEMI-FINISHED NEST No. 13
House Martin Nest No. 9B
Single Nest for House Martins No. 13
House Martin Semi-Finished Nest No. 13
The Double House Martin Nest 9B
with nesting bowls made of breathable
SCHWEGLER wood-concrete and
multiplex bracket (angled board) has
been developed as an alternative to the
House Martin Nest 9A on page 37.
In this House Martin Nest the entries
are orientated towards the front. The nesting bowls are easy to remove
and push in thanks to their metal clip holders. For details of hanging up,
occupancy, breeding period, cleaning and acceptance please see 9A.
Hanging site: Under eaves on the external wall of buildings. Please ensure
you hang it on side protected from the weather. House Martins do not breed
Material: Nesting bowls made of SCHWEGLER wood-concrete on 12 mm
multiplex bracket. Dim.: H 11 x L 46 x D 15.5 cm. Weight: approx. 2.6 kg.
Order No. 00 312/6
ACCESSORIES » Droppings Board for House Martin Nest No. 9B
Material: Multiplex board 12 mm.
Purpose: The optional SCHWEGLER Droppings Board can be attached to
avoid the nuisance caused by falling droppings.
Dimensions: H 17 x L 46 x D 24 cm (droppings board only).
No. 9B dimensions with Droppings Board: approx. H 44 x D 24 x W 46 cm.
Weight: approx. 2.9 kg. Order No. 00 313/3
In areas in which pools of clay or loam or clay soil are available and
accessible for Martins, the House Martin Nest No. 13B can be provided
as a semi-finished nest for the House Martins to finish themselves. The
advantage of the Semi-Finished Nests is that they provide a secure place
for breeding and cannot fall off, which can
certainly happen with the Martins' own
constructions, because of unsuitable clay
composition. The optimum solution is to
attach the Semi-Finished Nest alternately
with the tried and tested finished nests, for
example, No. 13, 9A or 9B.
Single nest with white
plastic panel, nesting bowl
closed at the rear.
Installation: With two rails (S-mountings) made of V2A metal (stainless
steel) with two drillholes each. The brood nest is pushed into these
mountings to fix them in place.
Material: SCHWEGLER wood-concrete nest on plastic mounting panel,
staining steel fixing rails with stainless steel screws.
Dim.: W 25 cm (including strip), D 14 cm. Weight: approx. 0.9 kg.
Order No. 00 315/7
In addition, we also supply:
ACCESSORY » Flat Connector for forming a row of nests
Order No. 00 316/4
VV Row of nests, side-by-side installed
with flat connector
VV Flat connector
We supply the wooden parts of Nest No. 9B and the Droppings Board
No. 9B in untreated wood. Although not absolutely necessary, it is
advisable to coat the multiplex bracket with wax, wood stain or (façade)
paint before installing it, to minimise discoloration caused by the
Please do not coat the nest dishes, to ensure they remain fully breathable for successful breeding.
VV Installation example
Material: SCHWEGLER woodconcrete nest on plastic mounting
panel, staining steel fixing rails
with stainless steel screws.
Dimensions: W 25 cm (including
strip), D 14 cm.
Weight: approx. 0.8 kg.
Order No. 00 318/8
BIRD CONSERVATION ON BUILDINGS
VV Application example