Useful information when installing Karndean LooseLay
Acclimatisation
At least 48 hours prior to installation, Karndean LooseLay must be removed from
packaging, unstacked and allowed to acclimatise in the room where the installation is to
take place. Room temperature should be kept between 18°C - 29°C (65°F - 85°F).
Subfloor Preparation
Subfloor preparation must comply with ASTM F710, AS/NZS 1884, BS 8203, DTU 53.2,
DIN 18365 (Teil C) or other applicable National Standards and Building Codes for the
installation of Resilient Flooring.
Installation
Before starting the installation remove all debris or dust and clean the floor. Karndean
LooseLay can be installed on any subfloor that is flat, level, smooth and dry using one of
the following three options:
1. Loose lay - fitted 'tightly' to the wall and each other using a suitable tackifier or
pressure sensitive adhesive around the edge of the room and at thresholds.
2. Grid stick - in rooms with walls longer than 4 metres (13 feet) use a suitable tackifier
or pressure sensitive adhesive around the edge of the room and at intervals across
the floor in a grid pattern, again fitting Karndean LooseLay tightly to the wall and
each other.
3. Heavy Traic / High Temperature Areas - we recommend installing Karndean
LooseLay with a full coverage of tackifier or pressure sensitive adhesive.
Routine Maintenance
Karndean LooseLay has a protective PU surface, which helps to protect the floor and
eliminates the need to strip and seal after installation.
Regular cleaning with a pH neutral cleaner such as Karndean Clean will help keep your
floor at its best.
Over time high traic may cause dulling to occur. To restore the appearance and
durability of your floor, strip the floor using the Karndean Remove solution, rinse the
floor with water and seal, using the Karndean Refresh sealer.
Repair
Karndean LooseLay is not only quick and easy to fit, but in a situation where you may
need to replace a damaged plank or tile, it's just as easy to replace a piece as it is to fit in
the first place.
v LLT201 & LLT203 LLP113 s LLT204 s LLT207 s
LLP111 s
LLP92 s
21