Head Office Sales: Tel: 01420 588180 Fax: 01420 588184 Email: sales@swp.uk.netttp://swp.uk.net" target="_blank" title="Visit swp.uk.net">swp.uk.netairsales@swp.uk.netpot Sales: Tel: 01942 719930 Fax: 01942 729937 Email: airsales@swp.uk.net
64
CAPITAL
PLANT EN 60974/1
MIG 220 & MIG 241 features
• Large cabinets can accept full height gas cylinder
• Heavy duty front and rear wheels for
increased stability
• Copper wound transformer and choke
• Forced air fan cooling
• Overload warning indicator
• Double support straps for gas cylinder
• Infinitely variable wire speed
• Spot weld timer
• Soft arc technology
• M25-3 torch and 2068 regulator included
• All geared 4-roll metal cast feed system
• Digital volt and amp meter
• Torch holder included
MIG 241 additional features
• Latch facility
• Burnback control
• Gas purge
The MIG 220 and MIG 241 are versatile and robust single phase welding machines ideally suited to light or medium fabrication.
On maximum power and maximum duty cycle the MIG 220 consumes only 5kVA - requiring only a 16A fuse and can be used on
site from a 6kVA generator. The MIG 241 consumes only 7.8kVA and requires only a 20A fuse and can be used in the field from
a 8kVA generator. Variable speed four roll wire feed is achieved through all-geared drive system, minimising the risk of wire slip
to create uniform welds.
Part No. 9348
PROLINE MIG 220
Part No. 9355
PROLINE MIG 241
Mains connection 1-230V
Fuse 16A
Welding Current 30-220A
Voltage steps 12
Duty Cycle 100% @ 70A
60% @ 100A
20% @ 190A
Welding wire diameter 0.6-0.8mm
Overall dimensions 830 x 302 x 780mm
Weight 58kg
Mains connection 1-230V
Fuse 20A
Welding Current 30-240A
Voltage steps 6
Duty Cycle 100% @ 100A
60% @ 140A
35% @ 200A
Welding wire diameter 0.6-1.0mm
Overall dimensions 830 x 302 x 780mm
Weight 61kg
• 4-roll wire feeder
Features
• Copper wound transformer and choke
• Forced air fan cooling
• Overload warning indicator
• Accepts 5 or full 15kg wire reels
• Robust front and rear wheels
• Euro professional welding torch
• Robust steel feed mechanism
• Excellent for thin steel
• Stainless Steel and MIG brazing
capabilities
• Spot weld timer
• Soft arc technology
• M15-3 torch and 2068 regulator
included
• 2-roll wire feed
Part No. 9346
PROLINE MIG 181
Mains connection 1-230V
Fuse 16A
Welding Current 40-165A
Voltage steps 6
Duty Cycle 100% @ 60A
60% @ 90A
20% @ 165A
Welding wire diameter 0.6-0.8mm
Overall dimensions 830 x 302 x 780mm
Weight 56kg