201
Environmentally Friendly
✓ VOC Compliant ✓ Low Odour ✓ Non-Solvent
Product
Indoor
installation
Outdoor
installation
Underlay Wet area
Sunlight/
Heater
Flotex Mega-Bond NA
Bond 1: Hi-Tack
Bond 2: Mega-Bond1
Mega-Bond
or 80002 NA
Pedigree
Carpet
Fiba-Bond
Fiba-Bond
UV
NA
Indoor only
8000
NA
Pedigree
Entrance Zone
Mega-Bond NA NA
Mega-Bond
or 8000
NA
1. When using the recommended Airstep Suporta Pad underlay; Bond #1 (Hi-Tack) is the
Suporta Pad to the subfloor. Bond #2 (Mega-Bond) is the Flotex Sheet to the underlay.
Because Suporta Pad is only partially absorbent, it is essential to allow the
Mega-Bond to tack-up first to avoid the surface floor covering from 'bubbling'.
2. 8000 Polyurethane 2-Part Adhesive is only required where permanent puddling is expected.
Domestic bathrooms, kitchens, laundries and commercial patient care areas of healthcare
buildings are not considered "permanent" wet areas and Mega-Bond is satisfactory.
Additional information is printed on the relevant adhesive use label and important specific
product installation information is contained on the instruction leaflet found in every roll or box
A great benefit of all Karndean adhesives is that each
formulation prevents spillages from seeping into joins.
In the case of Mega-Bond and Hi-Tack PS a polymer sealer
is incorporated.
For more information please refer to our Installation Guide
at www.karndean.com/installation or contact our Technical
Services Team on AUS 1800 810 920 or NZ 0800 442 101