98
Post Installation
• Do not walk on the floor until the adhesive has completely dried
- a recommendation of 12 hours.
• Remove all loose debris from the floor by using a soft sweeping brush or dust mop.
• Ensure that all traces of adhesive are removed from the surface by spot
cleaning with the recommended Karndean Clean.
• Use a damp mop with the recommended Karndean Clean
(dilute as applicable) or a PH neutral cleaner and leave to dry.
Commercial Routine Care and Maintenance
(For domestic cleaning and maintenance please refer to our Floor Care Kit)
General care and maintenance of your own floor could not be easier:
• Remove all loose debris from the floor by using a soft sweeping brush or dust
mop and post "Wet Floor" signs. If using a vacuum, make sure that the brushes
are in the DOWN position.
• Use a damp mop with the recommended Karndean Clean.
• Only use propriety floor cleaning products. DO NOT use bleach based
products or washing up liquid.
• Stubborn stains may be removed by spot cleaning with the recommended
Karndean Clean or Karndean Remove.
• Attend to spillages immediately.
• Liberally apply the cleaning solution over a manageable area using a clean mop.
• Thoroughly clean the mop with cold running water.
• Once the floor is completely dry remove "Wet Floor" signs.
• Karndean Clean can be used with automatic cleaning machines
(e.g. Scrubbing machines). Use a BLUE or RED pad.
NB: For larger commercial floor care consult a resilient floor cleaning
contractor in your area.
Do not use household cleaners on the floor for general cleaning unless they
are specified for vinyl floors as they can often leave an oily residue which could
make the floor slippery.cleaning and Maintenance
Cleaning and Maintenance