Digital Tools
• Standard setting functions: Torque, Measurement and Mode
• Operation in both clockwise and counter-clockwise directions
• LCD shows Nm (or kg-cm, in-lb, ft-lb) measurements
• Audible torque confirmation by means of buzzer and LED flashing
• Easy to configure Set, Peak or Track modes
• Batteries not included
• Static torque measurement
• Standard setting functions: Torque, Measurement and Mode
• Operation in both clockwise and counterclockwise directions
• LCD shows Nm (or kg-cm, in-lb, ft-lb) measurements
• Audible torque confirmation by means of buzzer
• Easy to configure Set, Peak or Track modes
ARM602-4
1/2" Digital Tool Adapter
ARM601-4
1/2" Digital Tool Wrench
ARM601-3
3/8" Digital Tool Wrench
ARM602-3
3/8" Digital Tool Adapter
Drive Head Gear Length Accuracy Torque Auto Operating Storage Alkaline Weight
(Square) Type Teeth Range Shut-Off Temp. Temp. Battery
inch mm >CW / >CCW ft-lbs (Nm) ºC ºC x2 lbs (kg)
ARM601-3 3/8 Quick 45 12-3/8 (315) ±2% / ±3% 2-37 (3-50) After 1 0-50 -10-60 AAA 1.40 (0.64)
ARM601-4 1/2 Release 45 17-5/16 (440) ±2% / ±3% 4-99 (5-135))
Minute of 0-50 -10-60 AAA 2.20 (1.00)
Ratchet No Use
Drive Length Width Height Accuracy Torque Auto Operating Storage Coin Cell Weight
(Square) Range Shut-Off Temp. Temp. Battery
inch inch (mm) inch (mm) inch (mm) >CW / >CCW ft-lbs (Nm) ºC ºC x2 lbs (kg)
ARM602-3 3/8 3.0 (75) 1-27/32 (47) 1-29/32 (48) ±2% / ±3% 3-60 (4-80) After 1 0-50 -10-60 CR2032 0.31 (0.14)
ARM602-4 1/2 3.0 (75) 1-27/32 (47) 1-29/32 (48) ±2% / ±3% 4-150 (5-200)
Minute of 0-50 -10-60 CR2032 0.44 (0.20)
No Use
BATTERY
TOOLS
83
Tel: 01942 719930 Fax: 01942 729937 E-mail: airsales@swp.uk.netttp://swp.uk.net" target="_blank" title="Visit swp.uk.net">swp.uk.net